G35 Intake

Showing 1–10 of 15 results

  • large_ManifoldSpacer180 (1)

    G35 & M35 1/4″ Manifold Spacer

    $95.00

    The Manifold spacer is installed between the lower plenum and intake manifold. Installing the Manifold spacer between the intake manifold and lower plenum allows additional clearance for oversize injectors commonly used in Forced Induction applications.


  • large_ManifoldSpacer180

    G35 & M35 1/2″ Manifold Spacer

    $126.00

    The Manifold spacer is installed between the lower plenum and intake manifold. Installing the Manifold spacer between the intake manifold and lower plenum allows additional clearance for oversize injectors commonly used in Forced Induction applications.


  • large_Z516bolts (1)

    G35 & M35 1/2″ Bolt Kit

    $53.00

    Replacement installation pack for the Motordyne 1/2″ plenum spacers. This installation pack is included with every plenum spacer kit.


  • large_Z516bolts

    G35 & M35 5/16″ Bolt Kit

    $53.00

    Replacement installation pack for the Motordyne 5/16″ plenum spacers. This installation pack is included with every plenum spacer kit.


  • large_StockManifoldGasket22

    G35 & M35 Stock Manifold Gasket

    $28.00

    The steel stock manifold gasket installed between the lower plenum and intake manifold. Use two of these gaskets, or the Aramid Iso Thermal gaskets, with a Manifold spacer to achieve the proper height needed for injector clearance. ~0.020” Thickness


  • large_aramidgasket

    G35 & M35 Aramid gasket

    $40.00

    Aramid thermal isolating gasket that is installed between the lower plenum and intake manifold. By installing the Iso Thermal™ Aramid gasket between the intake manifold and lower plenum the heat transfer is significantly reduced and both the upper and lower plenum assembly run at much lower temperatures.


  • 9 large_350ZG35M35FX35CopperIsoThermalupgrade130l

    G35 & M35 Copper Iso Thermal upgrade

    $89.00

    Copper Iso Thermal upgrade with Aramid gasket and Copper Throttle Body Heater. Compatible with any type of weather hot or cold, Copper Iso Thermal reduces heat transfer into your upper and lower plenum assembly, but unlike a simple bypass, the Copper Throttle Body Heater keeps only the throttle body heated to prevent ice formation inside the throttle body on very cold or snowy days. If it snows in your area use the Copper Iso Thermal for safe driving while still taking full advantage of the cold dense air for increased HP.


  • large_AllCarsIsoThermalupgradeat70

    G35 & M35 Iso Thermal upgrade

    $55.00

    Iso Thermal upgrade with Aramid gasket and Coolant Control Valve Motordyne Iso ThermalT is the most comprehensive plenum thermal management system available. The upgrade will l reduce heat transfer into the upper and lower plenum assembly and helps to reduce power loss as the engine bay becomes heat soaked. Compatible with any type of plenum stock or modified. Recommended for warm climates generally above 45 ° F.


  • large_350ZG35M35ModifiedCollector322

    G35 & M35 MREV 2 Manifold TM

    $565.00

    MREV 2 Manifold TM – The most powerful naturally aspirated bolt on you can put on your revup engine. When used with or without a spacer or aftermarket upper plenum, this lower plenum will make substantial power gains.   Multiple independent test show when used with a 5/16″ spacer on the revup engine, the combination will add a “minimum” of 15+ HP and 18+ TQ in the upper midrange. Many independent MREV 2 Manifold REVUP tests have dynod in excess of 20HP and 30 TQ in the upper midrange and with high RPM peak power increased by 3-5 HP.

    The MREV2 is a prerequisite to the plenum spacer when used on a revup engine. No other normally aspirated VQ modification provides as much gain as the MREV 2 Manifold!

     

    Independent dyno test on the Revup engine.

    Independent dyno test on the Non-Revup engine.
    Note: MREV2’s are made from non-revup core exchanges. Motordyne will buy your non-revup lower plenum. Contact us for more information.

     


  • large_516C

    G35 & M35 5/16″ Copper Iso Thermal plenum spacer

    $310.00

    The Motordyne Copper Iso Thermal plenum spacer adds 12HP-14HP and reduces the effect of power robbing heat soak by thermally isolating both the upper and lower plenum. Its 5/16″ thickness provides the best overall performance and is fully compatible with your engine cover and strut bar. All Motordyne Iso Thermal systems keep your upper and lower plenum cooled without the risk of throttle body freezing when driving in cold weather. Use the Copper if it snows in your area.